composite backshells a-86 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2009 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com a b c d e f g 447-657 composite low-profle micro band-in-a-can backshell with strain-relief clamp and self-locking rotatable coupling table ii shell size shell size max dash number (table ii) a f h a f, h 08 08 09 01 01 10 10 11 01 02 12 12 13 04 04 14 14 15 04 05 16 16 17 05 06 18 18 19 06 06 20 20 21 07 07 22 22 23 08 08 24 24 25 09 09 28 - - 10 10 32 - - 10 10 36 - - 10 10 40 - - 10 10 table iv: cable entry dash number k max l max cable entry min max 01 .843 (21.4) .78 (19.8) .125 (3.2) .250 (6.4) 02 .968 (24.6) .97 (24.6) .156 (4.0) .375 (9.5) 03 1.046 (26.6) 1.05 (26.7) .250 (6.4) .438 (11.1) 04 1.156 (29.4) 1.15 (29.2) .280 (7.1) .500 (12.7) 05 1.218 (30.9) 1.22 (31.0) .375 (9.5) .625 (15.9) 06 1.343 (34.1) 1.34 (34.0) .500 (12.7) .750 (19.1) 07 1.468 (37.3) 1.47 (37.3) .625 (15.9) .875 (22.2) 08 1.593 (40.5) 1.59 (40.4) .750 (19.1) 1.000 (25.4) 09 1.718 (43.6) 1.72 (43.7) .875 (22.2) 1.125 (28.6) 10 1.843 (46.8) 1.84 (46.7) 1.000 (25.4) 1.250 (31.8) table iii: finish symbol finish description xm 2000 hour corrosion resistant electroless nickel xmt 2000 hour corrosion resistant ni-ptfe, nickel- fluorocarbon polymer. 1000 hour grey tm xw 2000 hour corrosion resistant cadmium/olive drab over electroless nickel connector designator: a mil-dtl-5015, -26482 series ii, and -83723 series i and iii f mil-dtl-38999 series i, ii h mil-dtl-38999 series iii and iv self-locking rotatable coupling standard profile .88 .560 max 600-057-1micro band knurl style mfr option stainless saddle bar and screw washer cable entry k l for angled part requirements, use in conjuncion with glenair 327-060 extenders finish symbol ( see table iii) connector designator a, f or h product series 447 - emi/rfi non-environmental banding backshells 447 f s 657 xm 18 04 k s angle and profle s - straight basic part number connector shell size ( see table ii) cable entry ( see table iv) band option k - pre-coiled band (omit for none) slot option s - pigtail termin. slot (omit for none) notes metric dimensions (mm) are in pa - 1. renthesis and are for reference only. coupling nut supplied unplated. 2. see table i in intro for front-end 3. dimensional details.
|